FREE RETURNS. STANDARD SHIPPING ORDERS $99+
Showing 993–1008 of 3966 results
The sturdy 6mm stainless bracket is fixed through one slate to the rafter beneath. The slate above is replaced above the fixings, so that the roof remains weathertight. Where the bracket is close to the edge of the covering slate, we suggest using a lead soaker over the bracket to ensure the roof remains watertight….
The sturdy 6mm stainless bracket is fixed to the rafters. The slate above is replaced above the fixings, so that the roof remains weathertight. Where the bracket is close to the edge of the covering slate, we suggest using a lead soaker over the bracket to ensure the roof remains watertight. System features and specifications:…
These end caps for our mounting rail add the perfect finishing touch to your installation. The caps fit snugly into the ends of the mounting rail. Available in black or silver grey.
These standing seam roof hooks can be used to secure the mounting rails to the standing seams on a roof, with a bulb or concealed seam type. You can then attach whatever you wish onto the hole on the top of the clamp.Â
These standing seam roof hooks can be used to secure the mounting rails to the standing seams on a roof, such as a butler roof. Simply use a 13mm spanner to tighten the bolts on the hook and it will clamp onto the standing seam. You can then attach whatever you wish onto the 11mm…
Triangle bracket for flat roof or ground mounted solar systems for panels in portrait orientation with an angle of 30 degrees. This listing does not come with any screws, or cross connect clamps. Please select these separately, as these brackets can be utilised in a number of ways. Dimensions: rail is 40x40mm in L profile with…
80x to a small carton, 320x to a large carton. Key features: Universal clamp designed for 30-46mm solar panels Constructed from aluminium Suitable for flat or pitched roofs with a maximum slope of 60° Compatible with tiled, slate or metal roofs Wind load: up to 60m s Snow load: 2.0kN m2 Maximum building height: 20m…
The new, improved Firefighter s Safety Switch system from Santon is designed for automatic (remote motorised) disconnection of the DC output from an installed array of PV modules. 40A 1000V 4P with 8 x MC4 connectors and 1 x M12 The Firefighter Safety Switch system can operate disconnect a PV installation quickly, completely and remotely…
Part No: SLT-129062-001 Mounting – FixGrid FIXGRID FLAT GRID Load-optimized flat roof systems  Tension connector set M8 Mostly used to prevent sliding on a steeply inclined roof, or to provide a flexible joint where two arrays straddle the ridge of a roof. It can also be used to link arrays where lightning strikes could be…
Part No: SLT-169020-170 Mounting – FixGrid FixGrid ballast shaft 18 mm to 1700 mm module width fixgrid  Supplier Part No:169020-170 Weight:1.618 kg Length:1.7 m
Part No: SLT-169020-210 Mounting – FixGrid FixGrid ballast shaft 18 mm to 2067mm module width fixgrid  Supplier Part No:SLT-169020-210 Weight:1.969 kg Length:2.1 m
Part No: SLT-163900-003  Mounting – FixGrid FixGrid FixZ-15 center system rail 96mm with connector fixgrid  Supplier Part No:163900-003 Weight:0.545 kg
Part No: SLT-163900-002 Mounting – FixGrid FixGrid FixZ-15 lower system rail 96mm with connector fixgrid  Supplier Part No: 163900-002 Weight: 0.129 kg
Part No: SLT-163900-001 Mounting – FixGrid Fix Grid 18 FixZ-15 upper system rail 96mm with connector fixgrid  Supplier Part No:163900-001 Weight:0.359 kg
Part No: SLT-163900-012 Mounting – FixGrid FixGrid FixZ-7 lower system rail 96mm with connector fixgrid  Supplier Part No:163900-012 Weight:0.105 kg
Part No: SLT-163900-011 Mounting – FixGrid FixGrid FixZ-7 upper system rail 96mm with connector fixgrid  Supplier Part No:163900-011 Weight:0.16 kg
End of content
End of content
No products in the cart.
