Description Material Dimensions Weight Compatible Components To be used on the back row of an installation of ConSole + to reduce the windload and thus ballast required HDPE 1533 x 448 x 361 8,406 kg 520075-K 1 x Streamliner+ 9 x Hexag. screw DIN7504-ST5,5×25-A2-SW8 Keywords: REN520076, Renusol, PV Mounting, Flat Roof Tray
The ConSole+ provides an angle of 15 degrees. The ConSole+ assembly system is the ideal solution for installing PV modules on flat roofs with a pitch of up to 5 degrees without roof penetration. Most commercially available framed standard PV modules fit the ConSole+. The ConSole+ is weighed down with ballast e.g. gravel, paving slabs,…
This part is made up of the following items: 1 x REN-520075-K ConSole+ (incl. Mounting material and U-Profile)  The ConSole+ provides an angle of 15 degrees. The ConSole+ assembly system is the ideal solution for installing PV modules on the ground, especially ground that is unstable, for example landfill areas. Most commercially available framed standard…
When fixing the slate mate to the slate roof, holes are drilled. This sealant can be used to fill these holes, and seal under and around the A-slate plate. Colour:Â BlackTime to full cure:Â 24 hoursVolume:Â 290ml
The CTEK Indicator Panel is Specially designed for panel mounting and uses a LED traffic light system for a simple notification of battery health. Mount the Panel is a secure and convenient location and route the cable to the battery. The Panel comes in two cable lengths – 1.5m and 3.3m. This Indicator Panel is…
The CTEK Indicator Panel is Specially designed for panel mounting and uses a LED traffic light system for a simple notification of battery health. Mount the Panel is a secure and convenient location and route the cable to the battery. The Panel comes in two cable lengths – 1.5m and 3.3m. This Indicator Panel is…
The CTEK Indicator Eyelet Connector is perfect for charging and checking batteries that have difficult access. The traffic light system shows the battery status which is simple and clear. Just connect the eyelet terminals to the battery, check the status and then plug the connector into your CTEK charger if the battery needs to be…
The CTEK Adapter is compatible with new and the pre 2008 charger models. Just connect to the CTEK charger fitted with the ’old style’ connector and the unit immediately becomes ready for use. Cable length is 120mm. Brand CTEK Product Code 56-689 Barcode (EAN) 7350009566896
The Ctek Bumper protects and grips your Ctek charger, fitting all Ctek chargers 3.6 – 5.0A. Helps protect your CTEK charger from bumps and scratches. Gives extra grip on slippery surfaces. Made of durable silicon rubber material. Â Brand CTEK Barcode (EAN) 7350009569156
The CTEK CS FREE 12 Volt 20A Portable Battery Charger The CS FREE is a completely portable charger that will charge any 12V lead acid, AGM or lithium battery up to 130Ah. The CS FREE has an internal battery that is easily charged via USB and will hold it s charge for up to 1…
CTEK CS ONE 12V 8A Battery Charger 40-331 This charger operates effectively to maximise battery lifetime and gives optimal reliability. Non-sparking, reverse polarity protected and short-circuit proof. Features • RECOND option to restore and recondition lead-acid batteries. • WAKE UP option to revive seemingly dead lithium and lead-acid batteries. • 12V SUPPLY to support the…
CTEK CT5 Powersport 12V 2.3A Battery Charger 40-138 This charger operates effectively to maximise battery lifetime and gives optimal reliability. Non-sparking, reverse polarity protected and short-circuit proof. Features • Practical and easy to use • Tests and restores battery capacity • Output: 2.3A max • Non sparking • Reverse polarity protected • Short circuit proof Charging…
CTEK CT5 Time To Go 12V 5A Battery Charger – 40-162 • STAY IN CONTROL – Life is great – and even greater when you have control over your own time. When you re dreaming of the freedom and adventures offered by driving your vehicle, charging the battery might not be on top of your…